Genicom EasyCoder 3400e User Manual download pdf (Page 51)

Cd 39 Helvetica CondensedHelvetica Chapter 3— Maintaining the Printer

EasyCoder 3400e Bar Code Label Printer User’s Manual 39

6 Pull down on the lower media guide to expose the label gap sensor.

Using a cleaning brush or vacuum, remove all debris and dust from the

label gap sensor.

7 Clean the label gap sensor with a cotton swab and alcohol.

8 Replace the media and ribbon.

9 Engage the printhead by rotating the head lift lever counterclockwise

until it locks in place.

10 Replace the media cover.

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 125 126

EasyCoder 1
Bar Code Label 1
User's Manual 1
Document Change Record 3
Contents 5
Contents*1233* 6
1233*Helv Condensed Contents 7
Before You Begin 9
*1233* 10
Related Documents 11
Getting Started 13
Getting to Know Your Printer 14
Plugging In the Printer 15
Opening the Printer 16
3XXXU.005 17
3XXXU.006 18
3400e Hardware Configuration 19
3XXXU.008 20
3400U.020 25
3XXXU.021 26
Operating the Printer 27
3XXXU.024 28
Power/Data 28
Empty/Pause 28
Feed/Pause 28
Using the Feed/Pause Button 29
3XXXU.026 31
Core-locking 34
Bracket slot 34
3XXXU.028 35
120066102605140 37
Using the PrintSet Software 41
Using Third-Party Software 41
Printing a Test Label 41
*0123456789* 42
Maintaining the Printer 43
Inspecting the Printer 44
Maintenance Schedule 44
3XXXU.032 45
Cleaning the Printhead 46
3XXXU.033 47
Cleaning the Printer Covers 48
Upper medi 49
Cleaning the Label Sensors 50
Troubleshooting 53
Troubleshooting Checklist 54
Printer Operation Problems 54
Print Quality Problems 56
Communication Problems 57
Preventing Data Loss 58
Optimizing Printer 59
Performance 59
3XXXU.038 60
Adjusting the Print Darkness 61
3XXXU.037 62
3XXXU.040 63
Increasing Throughput 65
Using Test and Service Mode 67
Top Bank 69
Bottom Bank 69
Printing Test Labels 70
Using Data Line Print 70
3XXXU.047 72
Setting Emulation Mode 74
Using Forms Adjust 75
*FORMAT* 76
Y Forms Adjust 77
Specifications 79
Printer Specifications 80
Fonts and Graphics 81
Printhead 82
Printing Method 82
Printing Speed 82
Ribbon 82
Self-Strip (optional) 82
Printer Options 83
Finishers 84
2D Symbologies 86
2D Matrix Symbologies 87
Character Sets 89
International Character Sets 90
IBM Translation Hex Codes 91
Extended Character Sets 93
!"#$ 94
Characters in Font 95
Communications Reference 97
Communications Protocols 98
XON/XOFF, No Status Protocol 100
Polling Mode D 100
Multi-Drop Protocol 100
User-Defined Protocol 100
Communications Interfaces 102
RS-422 Serial Interface 103
RS-485 Serial Interface 103
3XXXU010.eps 104
Chassis Ground 105
Signal Ground 105
Clear to Send 105
Data Terminal Ready 105
3XXXU013.eps 106
Full ASCII Table 107
Full ASCII Table (continued) 109
Glossary 111
User-Defined Fonts (UDF) 118
XON/XOFF protocol 118
*071881-002* 126

Comments to this Manuals

No comments

Genicom EasyCoder 3400e User Manual Page 51

Comments to this Manuals